No search results
All search results
No search results
All search results

Lappset playground equipment is delivered as components and elements with:

» despatch notes

» installation instructions

» inspection and maintenance instructions.


Lappset design criteria ensures effi cient packaging for ease of transportation. The packages are placed on pallets to speed up the loading and handling, and significantly reduce transport damage and costs.


Installation instructions

With each Lappset product we attach clear assembly and installation instructions. Components are clearly numbered in order to make the installation as easy as possible. In the illustrated installation instructions you will find all the necessary information regarding frame connections, assembly of wall elements, panels, roofs and the installation of the structural elements such as posts, bars, nets, suspension bridges, steps and slides.


Minimum safety zones

The safety area for each product is shown in the catalogue and also in the installation instructions. Since products may change during the validity of this catalogue, the safety area must always be built according to the installation instructions provided with the product. Up-to-date documents can also be found on the Lappset website.


As standard, the playground equipment is installed on underground foundations. Alternatively, the equipment can be surface mounted. Please specify when placing your order if you wish to opt for surface mounting. Playground equipment and other items must be permanently fixed to the ground. Some equipment can be fixed to the ground using anchoring parts that must be ordered separately. The traditional use of concrete foundations is only required in certain cases. Details of specific foundations are given within the installation instructions.


According to the EN standards, playground equipment must be assembled on a surface the critical fall height of which corresponds to the fall height of the equipment. If loose materials, such as sand with a grain size of 0.2–2 mm or gravel with a grain size of 2–8 mm, are used, the required layer thickness varies between 25 and 40 cm. Safety tiles, which are made of bonded rubber shred, present an easy-to-clean option for a safe floor material. Elements can be assembled on top of grass, as long as their critical fall height does not exceed 1 m.

In addition to the shock absorbing base shown in the drawings, the safety sphere extends to at least 150 cm around all parts of the product upon which users can climb. Different countries may have different regulations regarding this space. Most countries prohibit allowing sharp and hard objects in this area, such as cut stones or rough tree stumps.

More detailed information on safe floor materials will be supplied with the assembly instructions.

Installation and maintenance


Installation instructions are sent with all products and must be followed.

Always read the installation instructions thoroughly before installing the playground equipment. The equipment must be assembled and installed on site following the installation instructions given by the manufacturer. The minimum safety zones mentioned in the installation instructions must also be adhered to.

Elevation and footing depths of the equipment must follow the instructions. The vertical parts must be vertical and the horizontal parts must be horizontal, as otherwise certain planned inclinations in the equipment may not conform to safety norms. If the guidelines for minimum safety zones mentioned in the installation instructions are not followed, the installer may have to accept the consequences of this negligence and compensate for any injuries sustained within the minimum safety zones.


Commissioning of the Playground

Before using the play area, a handover inspection should be performed. The handover inspection, log book and assembly instructions accompanying the order confirmation or delivery are provided to facilitate the inspection into the safety of the play area and to ensure that the facility has been correctly installed. Please remember that the play area should not be used until the site has been cleared and the playground declared safe!

Terms of delivery

All products are delivered FCA Rovaniemi unless something else has been agreed upon. When the products are delivered to the address given, the receiver is responsible for unloading the truck. Please make sure that you have the necessary unloading equipment ready to avoid delays.

Orders for standard products can be cancelled without any extra cost within 8 days of placing the order. Cancellations of orders for customised MyDesign Q products are subject to a charge of 70% of the product’s price. The delivery time can be postponed once (by a maximum of one month), but no later than one (1) week before the date on which the delivery vehicle is due to leave the factory.

Any missing items or damage sustained during transportation should be reported when unpacking the delivery and within 7 days of receiving the goods.

Inspection and maintenance

Safety of playground equipment results from:

» correct installation, including inspection,

» appropriate surfacing and

» regular maintenance


Ensure the continuous safety of your playground by regular safety inspections and maintenance procedures using the Lappset Service Manual. When drawing up the inspection and maintenance plan of the playground, consider the playground’s usage and susceptibility to vandalism. Carefully document the inspection and maintenance procedures. Access to the playground has to be restricted if the playground is not safe to use.

For further information, please contact your local distributor.


Ordering instructions

Orders can be made by letter, e-mail or phone. If modifications are required to standard products, please advice in writing.


Information on deliveries

If you have placed an order and need information on the delivery or if you have a problem with the delivery, please contact your local distributor.

Delivery time

We deliver within 2–8 weeks from receiving your order, depending on the season and the products. Please order standard products well in advance — no later than 4 weeks before you need them — to ensure that we can provide you with the product at a reasonable price even in high season. 


Product modifications

We develop our products constantly in line with international standards concerning both safety and quality. Therefore we reserve the right to modify our products and prices.


Patents and design protection

Lappset holds valid patent and design protection for its products. All rights are reserved.

Read more about services